There are bike lights, and there are bike lights with LASERS.....!!!!!
Bike safety has never looked so good, The Intelligent Laser Tail Light provides a type of lighting system that is rarely seen on the streets of the UK. Fitted to the rear of the bike, it will not fail to be noticed.
Laser Safety Lines:Project two red parallel lines on both sides of the bike, Improve driving safety at night.
Intelligent Control Technology:Intelligent control chip,built-in ultra-sensitive detection elements.
Water Resistant: Waterpoof design,circuit with special treatment,normal use on a rainy day
Auto off: Parking five minutes automatically shut down to reduce power consumption.
Logo Projection:Bike LOGO projected from the bike behind and warning behind vehicles keep safe distance.
Use a screw driver to open the top cap, place 2 AAA batteries into the notch and snap the cap back.
Screw the brackets to the seat post and click the brake light into bracket.
For users of brake model,please keep the laser light perpendicular to the ground to achieve best effect,adjust the vertical direction method is as follows:
In the arbitrary LED use mode,long press LED key five seconds and among the model three light will come on. The model is into the vertical adjusting mode.When adjusting brake lamp and horizontal ground approximate vertical state,five LED will be bright or flash. The model has been installed in a vertical position. Finish these steps then short press LED key to shutdown.
Long press the LAS button,hold it for 2 seconds to switch on/off,slightly press the button to switch to the parallel line operation modes. Laser 4 shine modes to choose from. Long press the LED button,hold it for 2 seconds to switch on/off, slightly press the button to switch to the LED flash modes: 5 LED 4 modes to choose